Intellinet-network NSC18-WN User Manual Instrukcja Użytkownika Pobierz pdf (Strona 35)

WEB MANAGEMENT INTERFACE

Set Date/Time manually—Enterthedateintherstthreeboxes,then

 thetime.TheformatforthedateisYYYY/MM/DD(sothatJuly2,

 2012=2012/07/02);the24-hourformatforthetimeisHH:MM:SS

 (sothat9:24:30pm=21:24:30).

NTP Server — Select to input the date and time automatically from the

NTP server.

Time Zone—Selecttheappropriatetimezonefromthedrop-downmenu.

NTP Server — Enter the IP address or hostname of the NTP server.

You can use the default value “pool.ntp.org” or ask your ISP for the

IP address or hostname, if they have one.

Synchronize to PC time — Click to match the camera date and time to

that of the computer connected to the camera.

Apply — Click to put any of the above settings/changes into effect.

3.6.3 Utilities

Upgrade Firmware—Ifyoudownloadthelatestrmwarelefromwww.

 intellinet-network.com,youcanclick“Browse”toselectarmware

 leonyourcomputer’sharddriveanduploadittothecameralater.

 Afteryouselectaproperrmwarelefromyourcomputer,click

“Upgrade Firmware” to start the upgrade. IMPORTANT: Do not

 disconnectorshutdownduringtheupgrade.Ifthermwareleyou

 provideisinvalidoryoudon’tprovidethermwareleproperly,you’ll

 bepromptedtoselectanothervalidrmwareleandtryagain.

NOTE: The camera will reboot once the upgrade procedure is

complete, and the IP address of the camera will reset to its default

value: 192.168.2.3.

Reset to Factory Defaults — Click “Reset” to clear all settings you’ve

made and revert to the original factory settings. NOTE: The camera’s

IP address will reset to its 192.168.2.3 default, and you’ll need to

change the computer IP address if it doesn’t begin with “192.168.2”

and the subnet mask isn’t 255.255.255.0.

Reboot Device — Click “Reboot” to reboot the camera, which may help

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 59 60

Brak uwag

Intellinet-network NSC18-WN User Manual Instrukcja Użytkownika Strona 35